Manuals / Primera Technology / Home Audio / CD Player

Primera Technology II user manual Index, Disc Output Location

Models: II

1 72
Download 72 pages 58.66 Kb
Page 23
Image 23
Disc Output Location

TOC

INDEX

If the Yellow, Magenta, Cyan or Black diagonal lines printed on the disc show breaks, repeat the cleaning procedure. If nozzles still appear to be clogged, remove the cartridge and gently wipe the nozzle area sideways with a clean water-dampened cloth. If after several cleanings a color still does not appear on the test print, the cartridge may be damaged or empty and may need to be replaced.

Select the Change button to install a fresh, new ink cartridge or to switch back and forth between previously used cartridges. After the cartridge has been replaced according to the instructions on page 10, Step 3: Installing Ink Cartridges, select either the New Cartridge Installed button or the Old Cartridge Installed button accordingly. These selections are necessary for the printer to accurately keep track of ink cartridge ink levels.

Select the Details button for information on the drivers, firmware, alignment and number of discs printed with your Publisher.

Disc Output Location

This can be set either Normal (Left Bin acts as output), or Kiosk (finished discs deposited out the Front Exit). The default is Normal (Left Bin). Note that this will only have an effect when doing printing only − this will have no affect when recording and printing through PrimoDVD. In PrimoDVD, click Robotics then Options and select Kiosk Mode check box.

Creating Discs on a PC 19

Page 22 Page 24
Page 23
Image 23
Primera Technology II user manual Index, Disc Output Location
Page 22 Page 24

FAQ

How often should I clean the ink nozzles?

You should clean the ink nozzles whenever the Yellow, Magenta, Cyan, or Black diagonal lines show breaks on the printed disc. If the nozzles still appear to be clogged after cleaning, you may need to replace the cartridge.

What should I do if a color does not appear on the test print?

If a color still does not appear on the test print after several cleanings, it may indicate that the cartridge is damaged or empty and needs to be replaced. Follow the instructions on page 10, Step 3 to install a new ink cartridge.

How can I change the output location for finished discs?

You can set the output location to either Normal Left Bin or Front Exit for finished discs. The default setting is Normal Left Bin, but in PrimoDVD, you can change this by clicking 'Robotics' then 'Options' and selecting the 'Kiosk Mode' checkbox.