TOC | INDEX |
5.Click OK to get back to the main screen.
6.Click on Robotics again.
7.Select Manual Movements.
8.Load at least
9.Click on Start Test. The robotic arm will move through its entire sequence automatically. If you specified more than one disc, it will continue until the number you specified is completed or it runs out of discs.
D.MAC SOFTWARE TEST
This will confirm that the hardware, software, and your computer are all communicating properly. To perform a software test please do the following:
1.Launch Discribe.
2.Click one of the options from the
3.Click the Robotics… button.
4.Click the Test Robotics button.
5.You can select where you want discs to go during the test and the number of times to repeat the test. Click Start. The Bravo will perform your test.
Maintenance and Troubleshooting 61