Primera Technology III manual Read Me First, Hardware Setup

Read Me First!

Congratulations on the purchase of your new CD Color Printer. To begin printing with your new printer immediately, please refer to the following quick start instructions. For more complete information regarding all aspects of your printer’s operation, please refer to the printer’s main User’s Manual.

HARDWARE SETUP

1.Unpackage your printer, and check that the following items are included:

•Power Adapter: Power Cord (220-240V units)

•Printer Software CD

•Color Ink Cartridge

•Spare Ink Cartridge Holder

•Cardboard CD Templates (5)

•Warranty Statement and Registration Card

•Operator’s Manual and Other Printed Information

2.Connect your printer’s power.

3.Install the included color ink cartridge by pressing the

Ink Cartridge Button and inserting the cartridge

copper-end first into the ink cartridge carrier. Then, push the top of the cartridge back until it snaps into place. When the cartridge is in place, press the Ink Cartridge Button again to reset the cartridge carrier.

4.Press the CD Tray Button, and install one of the cardboard CD templates into the CD Tray.

5.Run a self test according to the instructions in Section 2-D of the printer User’s Manual. This will ensure that both the printer and the ink cartridge are functioning properly. This procedure should also be done whenever you install a new ink cartridge or if your printer has sat for a few days without printing. If some of the nozzles do not seem to be firing, perform a clean operation after the printer driver has been installed. Refer to the cleaning procedure explained within the cartridge button description of section 3-D or 4-D in the manual to clean the cartridge nozzles.

iii