TOASTER
Operation
1 Press the On/Off Button to turn the unit on.
The conveyor will begin to turn and the display will read “LO”.
When the unit is at operating
R D Y 
temperature the display will read “RDY” and the ACT (actual temperature) LED will be lit.
Temperature LED’s
Display
Power On/Off Button
2 Turn the Bun Thickness Adjustment Knobs to the desired setting.
Left Side Control | Right Side Control |
1 = Thinnest Cut | A = Thinnest Cut |
6 = Thickest Cut | F = Thickest Cut |
3 Feed the buns into the bun chute, flat (toasted) side up.
Bun Chute
4 Press the On/Off Button to turn the unit off.
If the heater is above 450°F, the display will alternately show “COOL” and “OFF”, and the con- veyor belt will continue to run approximately 45 minutes. When the unit has cooled sufficiently, the display will go blank and the conveyor motor will turn off.
Power On/Off Button
NOTE: Factory preset temperature is 570°F and should provide satisfactory results in most applications. Maximum temperature of unit is 580°F (304°C).
3 | Printed in USA 0324 © 2003 |
