ProForm 630 DS user manual To the next settings of the CD or video program, Remove the key

2 Press the MODE button.

When the key is in- serted, the manual mode will automatically be selected. To use an i-Fit.com CD or video, press the MODE but- ton. The i-Fit.com indi- cator will light.

3 Insert the i-Fit.com CD or video.

If you are using an i-Fit.com CD, insert the CD into your CD player. If you are using an i-Fit.com video, insert the video into your VCR.

4 PressVCR. the PLAY button on your CD player or

A moment after the button is pressed, your per- sonal trainer will begin guiding you through your workout. Simply follow your personal trainer’s instructions.

During the CD or video program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change.

CAUTION:	Always listen for the “chirp” and be
prepared for speed	and/or incline changes. In

some instances, the speed and/or incline may change before the personal trainer describes the change.

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the SPEED or INCLINE buttons

on the console. However, when the next “chirp” is heard, the speed and/or incline will change

to the next settings of the CD or video program.

To stop the program at any time, press the STOP
button on the console. The TIME/INCLINE display
will begin to flash. To restart the program, press
the START button again. After a moment, the
walking belt will begin to move at 1 mph.		When
the next “chirp” is heard, the speed and in-
cline will change to the next settings of the CD
or video program	. The program can also be

stopped by pressing the STOP button on your CD player or VCR.

When the CD or video program is completed, the

walking belt will stop and the T IME/INCLINE dis- play will begin to flash. Note: To use another CD

or video program, press the STOP button or re- move the key and go to step 1 on page 12.

Note: If the speed or incline of your treadmill does
not change when a “chirp” is heard, make sure that
the i-Fit.com indicator is lit and the T		IME/INCLINE
display is not flashing.	Next, adjust the volume of

your CD player or VCR. If the volume is too high or too low, the console may not detect the signals from your CD player or VCR. In addition, make sure that the audio cable is properly connected. If you are using your portable CD player and the CD skips, set the CD player on the floor or another surface in- stead of on the console.

Follow your progress with the LED track and

5the four displays.

See step 5 on page 10.

6 Measure your pulse, if desired.

See step 6 on page 11.

When the i-Fit.com CD or video is finished,

7 remove the key.

Step onto the foot rails and remove the key from the console. Keep the key in a secure place.

Note: If the displays and various indicators

on the console remain lit after the key is re- moved, the console is in the “demo” mode. Refer to page 14 and turn off the demo mode.

CAUTION: Always remove i-Fit.com CD’s and videos from your CD player or VCR when you are finished using them.

When you are finished using the treadmill, move the on/off switch near the power cord to the off position.

HOW TO USE OTHER I-FIT.COM TECHNOLOGY

By adding the optional upgrade module to the console, you can add virtually endless options to your treadmill. To purchase the upgrade module, visit your local

department store or sporting goods store or go to www.i-fit.com.

Instructions for using other i-Fit.com options will be

included with the upgrade module. In addition,make sure to explore www.i-fit.com to learn more about

how you can get the most from i-Fit.com technology!

12