ProForm 831.28645.0 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included hex keys, assembly requires a Phillips screwdriver			, an adjustable
wrench	, and a rubber mallet	.

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow- ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem- bled. If a part is not in the parts bag, check to see if it has been preassembled.

Star Washer	M4 x 13mm	M6 Split	M8 Split	M10 Spacer
(100)–3	Washer (93)–2	Washer (88)–8	Washer (72)–2	(76)–2

Wave Washer

(98)–8

M10 x 20mm x 1mm Washer (81)–2

M10 x 20mm x	M10 x 20mm x	M10 x 25mm
1.5mm Washer	2mm Washer	Washer (94)–4
(84)–2	(92)–4

M8 Nylon	M10 Nylon
Locknut (96)–4	Locknut (97)–2

M4 x 16mm	M4 x 16mm	M6 x 35mm Phillips	M8 x 42mm Bolt
Self-tapping	Screw (86)–4	Screw (87)–8	(71)–4
Screw (79)–10

M8 x 16mm Button	M8 x 48mm Button	M10 x 20mm Button	M10 x 23mm Shoulder
Screw (95)–3	Screw (78)–2	Screw (91)–4	Screw (80)–8

M10 x 62mm Bolt (89)–4 M10 x 78mm Button Screw (90)–2

5