ProForm PFEL07907.0 user manual Assembly

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included tools, assembly requires a Phillips screwdriver , two adjustable

wrenches , a rubber mallet , and pliers .

Use the drawings below to identify the small parts required for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number fol- lowing the key number is the quantity needed for assembly. Note: Some small parts may have been pre- assembled. If a part is not in the hardware kit, check to see if it has been preassembled.

M6 Washer	M8 Split		M10 Split	7.6mm Spacer	M8 Jam Nut	M4 x 16mm
(64)–2	Washer (130)–4	Washer (73)–2		(109)–2	(86)–6	Screw (98)–4
M4 x 12mm	M6 x 16mm Patch		M8 x 54mm Button Screw (83)–4		M8 x 42mm Button
Round Head
	Screw (76)–4				Bolt (85)–4
Screw (96)–1
M8 x 44mm Button Screw (84)–8				M8 x 79mm Bolt Set (65)–2
M8 x 38mm Button Bolt				M10 x 108mm Button Screw (70)–2
(105)–2

5