ProForm PFEL54930 user manual HOW to Connect Your VCR

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 16.

A. Plug one end of a 1/8” to RCA stereo audio cable (available at electronics stores) into the jack beneath the console. Plug the other end of the cable into the AUDIO OUT jack on your VCR.

A

ANT. IN

VIDEO AUDIO

IN

RF OUT

CH

3 4

OUT

AUDIO OUT

RIGHT

LEFT

Audio

Cable

B. Plug one end of a 1/8” to RCA stereo audio cable (available at electronics stores) into the jack beneath the console. Plug the other end of the cable into an RCA Y-adapter (available at electron- ics stores). Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR

and plug the wire into the unused side of the Y- adapter. Plug the Y-adapter into the AUDIO OUT jack on your VCR.

B	ANT. IN
VIDEO AUDIO
IN
	RF OUT
	CH
3	4
OUT
RCA
Y-adapter
Audio Cable
Wire removed from
AUDIO OUT jack

17