ProForm PFEL54930 user manual Assembly, Wrench A rubber mallet

ASSEMBLY

Assembly requires two persons.	Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.			In	addition to the
included allen wrenches, assembly requires a phillips screwdriver			, an	adjustable
wrench	, and a rubber mallet		.
Refer to the drawings below to identify the small parts needed for assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST on page 22. The number following the key
number is the quantity needed for assembly.		Note: Some small parts may have been pre-assembled. If a

part is not found in the parts bag, check to see if it has been pre-assembled.

	M4 x 16mm		M4 x 22mm	M10 Nylon
	Screw (66)–4		Screw (93)–2	Locknut (106)–4
M10.3 Black	M6	Large	M8.5	M10 Split	M8 Large
Washer (53)–2	Washer (94)–2		Washer (45)–2	Washer (70)–1	Washer (113)–2
M6 x 16mm Button		M6 x 45mm Flat		M8 x 19mm Patch	M8 x 19mm Shoulder
Screw (109)–2		Screw (20)–4		Screw (108)–4	Screw (22)–2
			M10 x 112mm Carriage Bolt (34)–4
			M10 x 85mm Button Screw (63)–1

5