ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own phillips screwdriver ,
adjustable wrench , and rubber mallet .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe- ses below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre- assembled. If a part is not in the parts bag, check to see if it has been preassembled.
Wave Washer | Large Wave | M8 Split |
| M8 Washer | M8 x 23mm x | M8 x 23mm x | |
Washer | Washer | 1mm Washer | 2mm Washer | ||||
|
|
|
|
|
| ||
M10 Split |
| M10 Nylon | M4 x 16mm | M4 x 16mm | M8 x 14mm Button | ||
| Screw | Round Head | Screw | ||||
Washer |
| Locknut | |||||
|
|
| Screw |
| |||
|
|
|
|
|
|
| |
M8 x 19mm Button | M8 x 23mm Button |
| M10 x 78mm Carriage Bolt | ||||
Screw |
| Screw |
|
|
|
| |
M8 x 45mm Button |
|
| M10 x 80mm Button Screw | ||||
Screw |
|
|
|
|
|
5