4. Hold the Left Upright (89) against the Base

4

 

 

(94). Be careful not to pinch the Upright

 

 

Wire (81). Insert two 3/8" x 1 1/4" Bolts (8) with

 

 

81

two 3/8" Star Washers (13) and two 3/8" x

 

 

2 3/4" Bolts (7) into the Left Upright.

 

89

 

Partially tighten the 3/8" x 2 3/4" Bolts (7) and

 

 

the 3/8" x 1 1/4" Bolts (8) until the heads of the

 

 

 

Bolts touch the Left Upright (89); do not fully

 

 

 

tighten the Bolts yet. Note: It may be helpful

 

 

 

to use the Short Hex Key (64) on the Bolt

 

 

 

shown.

 

7

64

Attach the Right Upright (not shown) in the

 

same way. Note: There are no wires on the

 

 

 

right side.

13

 

 

 

 

 

 

8

13

94

5. Identify the Left Base Cover (82) and the Right

5

 

 

Base Cover (83). Slide the Left Base Cover onto

 

 

the Left Upright (89). Slide the Right Base Cover

 

 

80

onto the Right Upright (90). Do not press the

 

 

Base Covers into place yet.

 

 

 

Identify the Left Upright Cover (79) and the

 

 

90

Right Upright Cover (80). Slide the Left Upright

 

89

Cover onto the Left Upright (89). Slide the Right

 

 

Upright Cover onto the Right Upright (90).

 

79

83

 

 

 

 

 

82

 

 

8

 

 

Page 8
Image 8
ProForm PFTL14511.0 warranty Be careful not to pinch the Upright, Tighten the Bolts yet. Note It may be helpful