ProForm PFTL78007 Be careful not to pinch the Upright Wire, Not fully fold the Frame yet

4. Set the Right Upright Spacer (79) on the Base	4	6
(83). Be careful not to pinch the Upright Wire
(38). With the help of a second person, hold a	78
Bolt Spacer (88) inside the lower end of the
Right Upright (78). Insert a 3/8" x 4 1/2" Bolt (6)
with a 3/8" Star Washer (9) into the Right			9
Upright and the Bolt Spacer. Repeat this step	79		38
with a second Bolt Spacer (88), 3/8" x 4 1/2"
Bolt (6), and 3/8" Star Washer (9). Then, set
the Right Upright in the Right Upright Spacer.
Tighten the 3/8" x 4 1/2" Bolts (6) with your fin-			88
gers; do not fully tighten the Bolts yet.
	83
5. With the help of a second person, carefully tip	5
the treadmill onto its right side. Partially fold the
	B
Frame (56) so the treadmill is more stable; do	A
not fully fold the Frame yet.
Remove and discard the two indicated bolts (A)
and the shipping bracket (B).		83
Attach a Base Pad (81) to the Base (83) in the	81	56
location shown with a 1" Tek Screw (2) and a			4
Base Pad Spacer (13). Then, attach another	2
Base Pad (81) with only a 1" Tek Screw (2).
Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),	13
and the shipping bracket (C) from the Base (83).		84
Attach a Wheel (84) with the Bolt and the Nut
	2	81
that you just removed. Do not overtighten the
Nut; the Wheel must turn freely. Discard the		8	C
shipping bracket.
6. Set the Left Upright Spacer (76) on the Base	6
(83). With the help of a second person, hold a
	6
Bolt Spacer (88) inside the lower end of the Left		74
Upright (74). Insert a 3/8" x 4 1/2" Bolt (6) with a
3/8" Star Washer (9) into the Left Upright and
the Bolt Spacer. Repeat this step with a sec-	9
ond Bolt Spacer (88), 3/8" x 4 1/2" Bolt (6),
and 3/8" Star Washer (9). Then, set the Left	76
Upright in the Left Upright Spacer.			83
Tighten the 3/8" x 4 1/2" Bolts (6) with your fin-
gers; do not fully tighten the Bolts yet.	88
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.
	8