HOW TO USE A CLASSIC WORKOUT
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 14.
2.Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 14.
3. Select a preset classic workout.
Press the Classic Workouts button. Then, press the left, right, up, and down Navigation buttons until the name of the desired classic workout ap- pears in the display. Note: To return to a previous display, press the Back button. To return to the manual mode, press the Classic Workouts button.
When you select a classic workout, the display will show the name, the duration, the maximum incline setting, and the maximum speed setting of the workout. In addition, a profile of the speed settings of the workout will appear in the display.
When the desired workout is selected, press the Enter button.
Each classic workout is divided into
4.Press the Start button to start the workout.
A moment after you press the Start button, the treadmill will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and begin walking.
At the end of the first
speed and/or incline setting is programmed for the second segment, the speed and/or incline setting will flash in the display for a moment to alert you.
The treadmill will then automatically adjust to the speed and incline settings for the second segment and the small arrow will move one position to the right.
The workout will continue in this way until the small arrow reaches the right end of the profile. The walking belt will then slow to a stop.
If the speed or incline setting for the current seg- ment is too high or too low, you can override the setting by pressing the Speed or Incline buttons; however, when the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
5.Select a display mode and follow your progress with the display.
When you select a classic workout, the display will show the time remaining in the workout, the dis- tance you have walked or run, the approximate number of calories you have burned, the incline of the treadmill, and the speed of the walking belt.
In addition, a profile of the speed settings of the workout will appear in the display. A small arrow below the profile will indicate your progress. The dis- play can also show the date and an animation of a runner. Press the Display button repeatedly to select the desired display option.
6.Measure your heart rate if desired. See step 7 on page 17.
7.When you are finished exercising, remove the key from the console.
See step 8 on page 17.
18
