Aiwa CX-NA22 manual Remote Controil, To stand the AM antenna on a surface, Q’ D

To position the antennas

FM antenna:

Extend fully and fix its end to the wall.

AM antenna:

Position to find the best reception.

To stand the AM antenna on a surface

Fix the claw to the slot.

m

●Be sure to connect the speaker cords correctly. Improper connections can cause short circuits in the SPEAKERS

terminals.

. Do not leave objects generating magnetism near the speakers.

●Do not bring the FM antenna near metal objects or curtain rails.

. Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, since noise will be picked up.

●Do not unwind the AM antenna wire.

\ To connect other optional equipment+ page 17. I

REMOTE CONTROIL

Inserting batteries

Detach the battery cover on the rear of the remote control and insert two\R6 (size AA) batteries.

Q’ D

R6(AA)

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

To use the SHIFT button on the remote control

Buttons @)have two different functions. One of these functions is indicated on the button, and the other on the plate above the button.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the button while pressing the SHIFT button,

To use the FUNCTION button on the remote control

The FUNCTION button substitutes for the function buttons (TAPE/ DECK 1/2, TUNER, VIDEO/AUX,CD) on the main unit.

Each time the FUNCTION button is pressed, the next function is ❑ selected cyclically. When tapes are inserted in both decks, both

decks are selected with the FUNCTION button.

o

SHIFT

E PRESET

FUNCTION

.

m’

● If the unit is not going to be used for an extended period of time, remove the batteries to prevent possible electroly~e leakage.

● The remote control may not operate correctly when:

- The line of sight between the remote control and the remote sensor inside the display window is exposed to intense light, such as direct sunlight

- Other remote controls are used nearby (those of a television, etc.)

.

ENGLISH ~