Aiwa CX-NA22 Graphic Equalizer, Manual Tuning, ==-J u, L--.----~, To cancel the selected mode

Models: CX-NA22

1 64
Download 64 pages 3.42 Kb
Page 7
Image 7
GRAPHIC EQUALIZER

GRAPHIC EQUALIZER

This unit provides the following three different equalization curves. ROCK: Powerful sound emphasizing treble and bass

POP: More presence in the vocals and midrange

JAZZ: Accented lower frequencies for jazz-type music.

Press one of the GRAPHIC EQUALIZER buttons.

To cancel the selected mode

Press the selected button again. ‘(EQoFF” is displayed.

To select with the remote control

Press the GEQ button repeatedly while pressing the SHIFT button. The GEQ mode is displayed cyclically as follows.

ROCK — POP — JAZZ — EQoFF (cancel)

MANUAL TUNING

MONO

TUNER

BAND

SHIFT

-==-J u

1 Press the TUNER/BAND button repeatedly to select the desired band.

L–-.----~

When the TUNER/BAND button is pressed while the power is off, the power is turned on directly.

To select a band with the remote control

Press the BAND button while pressing the SHIFT button.

2 Press the 4+ DOWN or > UP button to select a station.

Each time the button is pressed, the frequency changes.

When a station i$ received, “TUNE is displayed for 2 seconds. During FM stereo reception, (1[~1}] is displayed.

To search for a station quickly (Auto Search)

Keep the 44 DOWN or - UP button pressed until the tuner starts searching for a station. After tuning in to a station, the search stops.

To stop the Auto Search manually, press the 4 DOWN or _ UP button.

The Auto Search may not stop at stations with very weak signals.

When an FM stereo broadcast contains noise

Press the MONO TUNER button while pressing the SHIFT button on the remote control so that “AU”TOdisappears on the display. Noise is reduced, although reception is monaural.

To restore stereo reception, press these buttons so that “AUTO” appears.

To change the AM tuning inte!rval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the fr6quency allocation system is 9 kHz/step, change the tuning interval.

Press the POWER button while pressing the TUNER/BAND button.

To reset the interval, repeat this procedure.

m

When the AM tuning interval is clhanged, all preset stations are cleared. The preset stations have to be set again.

ENGLISH 6

Page 7
Image 7
Aiwa CX-NA22 manual Graphic Equalizer, Manual Tuning, ==-J u, L--.----~, To select with the remote control