Aiwa CX-NA22 manual Loading Discs, Playing Discs, Open Close

To play one disc only, press one of the DISC DIRECT

BASIC OPERATIONS

PLAY buttons.

/

The selected disc is played once.

DISC CHANGE —>EDIT/CHECK

DISC DIRECT PLAY “ I

To stop play, press the ■ button.

To pause play, press the 11 button. To resume play, press again. To search for a particular point during playback, keep the

+or ~ button pressed and release the button at the desired point.

To skip to the beginning of a ‘track during playback, press the + or > button repeatedly.

To remove discs, press the A OPEN/CLOSE button.

To start play when the power is off (Direct Play Function) Press the CD button. The power is turned on and play of the loaded disc(s) begins.

When the A, OPEN/CLOSE button is pressed, the power is also turned on.

A OPEN/CLOSE				#u				To check		the remaining	time
								During play, press the EDIT/CHECK button on the remote control
LOADING		DISCS						while pressing the SHIFT botton. The amount of time remaining
								until all tracks finish playing is displayed. To restore the playing
								time display, repeat the above.
Press	the	CD button,		then press	the =		OPEN/	‘
CLOSE	button to open the disc compartment.						Load	Selecting		a track with the remote control
disc(s) with the label side up.								1	Press one of the DISC DIRECT PLAY buttons to select a disc.
To play one or two			discs,	place the discs on tray 1 and 2.				2	Press the numbered buttons and the +1O button to select a
To play	three	discs,	press the DISC CHANGE			button to rotate			track.
the trays	after	placing two discs. Place the third				disc on tray 3.			Example:
Close the disc compartment				by pressing the	A	OPEN/CLOSE			To select the 25th track, press the +1O, +1O and 5 buttons.
button.									To select the 10th track,		press the +1O and O buttons.
									The selected track starts to play and continues to the end of
									that disc.
								Replacing		discs during	play

Tray 1

CHANGE

Tray number of the

Total playing time disc to be played

Total number of tracks

W~le one disc is playing, ;he other discs can be replaced without interrupting play.

1Press the DISC CHANGE button.

2Remove the discs and replace with other discs.

3Press the A OPEN/CLOSE button to close the disc compartment.

m

●When loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray.

●Do not place more than one compact disc on one disc tray.

●Do not tilt the unit with discs loaded. Doing so may cause

. malfunctions.

PLAYING DISCS

Load discs.

To play all discs in the disc compartment, press the

-button.

Play begins with the disc on tray 1.

Elapsed playing time

~ENGLISH