Aiwa CX-NA22 manual Before Operation, Audio Adjustments, Volume, Super T-Bass Syst,Em

.’

BEFORE OPERATION AUDIO ADJUSTMENTS

CD

T-BASS

SHIFT

VOLUME

VOLUME

PHONES

T-BASS

To turn the unit on

,..

Press one of the function buttons (TAPE, TUNER, VIDEO/AIJK CD).

Playback of the inserted disc or tape begins, or the previously tuned station is received (Direct Play Function).

The POWER button is also available.

When the unit is turned on, the disc compartment may open and close to reset the unit.

DEMO (Demonstration) mode

When the ‘AC cord is connected, the display window demonstrates the functions of the unit. When the power is turned on, the DEMO display is overridden by the operation display. When the power is turned off, the DEMO mode is restored.

To cancel DEMO mode

Press the II SET button while the power is off. The clock flashes on the display. (To set the current time, see “SETTING THE CLOCK on page 15.) To re-activate DEMO mode, press the - button while the power is off.

Flash window

The window on the top of the unit lights up or flashes while the unit is being powered on.

To turn off the light of the top window, press the CD button while pressing the ■ button. To turn back on, repeat the above.

To turn the unit off

Press the POWER button.

VOLUME

Turn the VOLUME control on the main unit, or press the VOLUME buttons on the remote control.

The volume level is displayed as a number from Oto MAX (31). The volu~e level is automatically set to 16 when the power is turned off with the volume level set to 17 or more.

SUPER T-BASS SYST,EM

The T-BASS system enhances the realism of low-frequency sound.

Press the T-BASS button.,

Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference.

&+l++2~+3~oFF (cancel)~

I

To select with the remote centrol

press the T-BASS button while pressing the SHIFT button.

m

Low frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low frequency sound is originally emphasized. In this case, cancel the T-BASS system.

Using the headphones

Connect headphones to-the PHONES jack with a standard stereo plug (06.3 mm, ‘/4 inch).

No sound is output from the speakers while the headphones are plugged in.

Sound adjustment during recording

The output volume and tone of the speakers or headphones may be freely varied without affecting the level of the recording.

5 ENGLISH