THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of treadmill usage information and allows you to select a unit of measurement for the console.
To select the information mode, insert the key into the console while holding down the Stop button, and then release the Stop button. When the information mode is selected, the following information will be shown:
The upper display will show the total number of hours that the treadmill has been used.
The lower left display will show the total number of miles (or kilometers) that the walking belt has moved.
An “E” (for English) or an “M” (for metric) will appear in the lower right display. Press the Speed increase button to change the unit of measure- ment, if desired.
IMPORTANT: If a “d” appears in the lower right display, the
console is in the “demo” mode. This mode is intended to be
used only when a treadmill is displayed in a store. When the
console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays will remain lit; the buttons will not oper- ate. If a “d” appears when the information mode is selected, press the Speed decrease button so the “d” disappears.
To exit the information mode, remove the key from the console.
14
