2. Attach two Round Base Pads (57) to the base of

2

 

the right Upright (69) with two 1" Tek Screws

 

 

 

(39).

 

64

 

 

Attach a Wheel (66) to the base of the right

69

66

Upright (69) with a Wheel Bolt (64) and a Wheel

 

 

 

Nut (32) as shown. Do not overtighten the

 

32

Wheel Bolt; the Wheel should turn freely.

 

 

 

39

 

 

57

 

57

39

3. With the help of a second person, carefully tip

3

 

the treadmill onto its right side. Do not fully fold

 

 

 

the frame until the treadmill is completely as-

 

69

sembled.

 

Insert the other Extension Leg (63) into the base

 

93

of the Uprights (69). Hold an Extension Leg Nut

 

 

101

(46) in the bottom of the Extension Leg, and

 

 

 

thread a 2.25” Bolt (93) with a 5/16” Star

 

 

Washer (101) into the top of the Extension Leg.

101

 

Next, thread a 2.75” Bolt (100) with a 5/16” Star

 

 

Washer (101) into the bottom of the Extension

 

46

leg. Firmly tighten the Bolts.

 

100

 

 

63

4. Attach two Round Base Pads (57) to the base of

4

 

the left Upright (69) with two 1" Tek Screws (39).

 

 

 

Attach a Wheel (66) to the base of the left

66

 

Upright (69) with a Wheel Bolt (64) and a Wheel

64

 

Nut (32) as shown. Do not overtighten the

 

69

Wheel Bolt; the Wheel should turn freely.

 

 

 

32

 

 

39

 

 

57

57

 

 

39

 

7

 

Page 7
Image 7
ProForm PMTL32706.0 user manual Nut 32 as shown. Do not overtighten, Frame until the treadmill is completely as Sembled