Proline PLJW102, PLJW101, PLFW102, PLFW101 user manual Hood Insert Installation, Step

14  PROLINE RANGE HOODS

HOOD INSERT INSTALLATION

STEP 1

Mark the leveling point of the hood. Position two mounting screws on the wall leaving 1/8” space between the wall and your hood. If you are installing under a cabinet, the hood should be flush with the front of the cabinet. Make sure you mount the hood on wall studs or lumbars for secure placement.

STEP 2

Attach the hood-mounting bracket to the back of the hood with the six screws provided.

STEP 3

Puncture the knockout wire access hole at the back of the hood and pull the electrical wires through the back.

USER MANUAL  15

HOOD INSERT INSTALLATION

STEP 4

Align hood-mounting bracket to the screws on the wall and hook hood into place. Additional mount- ing fasteners may be used to further secure your hood.

STEP 5

Use 6” or 8” round steel pipe to connect the exhaust on the hood to the ductwork above. Use silver tape or duct tape to make all joints secure and air tight.

STEP 6

Make your electrical connections. The hood comes with a grounded three prong plug that can either be direct wired or plugged into a 20 amp circuit.