50
OTHER FUNCTION SETTING
This Projector is designed for connecting with USB Port of the computer or peripheral equipment that is to be standard.
When this function is in the " " (Mouse) position, you control the pointer of the computer used the projector's
wireless remote control unit.
When this function is in the " " (Control) position, you control the projector by computer.
NOTE: Before you control the projector by computer, install USB driver (optionally saled parts) and set up the computer
following instruction in the USB driver package. Contact your authorized dealer or service station.
This projector has other functions setting: Blue back, Display, Reverse T/B, Reverse R/L, Split wipe, Power management,
USB, Remote control and Lamp age.

TB

TB

LR

LR

BLUE BACK (On or Off)
SPLIT WIPE (On or Off)
REVERSE L/R (On or Off)
REVERSE T/B (On or Off)
DISPLAY (On or Off)
USB (Mouse or Control)
POWER MANAGEMENT (On or Off)
When this function is in the "On" position, the projector will project a blue image without video noise on the screen when the
video source is unplugged or turned off.
When this function is in the "On" position, on-screen displays always appear when adjustments are made. Although these
on-screen displays are very helpful, these may spoil the view if adjustments are made during presentations. To avoid this,
you can keep back certain displays by switching this function "Off". The followings are the displays that you can hide.
● Wait Display ● Mode Display ● Volume Display
● Mute Display ● Zoom/Focus/Lens shift Display ● D.Zoom Display
● Normal Display ● No show Display
When this function is in the "On" position, the top/bottom picture reverse.
Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image side
ways when the input source is changed.
Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and the
next one appears from the center to side ways like drawing the black curtains.
Turn POWER MANAGEMENT function On in the SETTING menu. The projector is power save mode. In this mode, the
projector LAMP is automatically off when no signal of the source for 5 minutes. Incoming the signal is again, the projector
LAMP is automatically on.
When this function is in the "On" position, the left/right picture reverse capability
lets you project onto a rear projection screen.