Pure Digital VX4600 manual Select Ringer / Earpiece / Key Beep

Using Phone Menus

NOTE: Dual-Tone Multi Frequency (DTMF) Signaling by the simultaneous transmission of two tones, one from a group of low frequencies and another from a group of high frequencies. Each group of frequencies consists of four frequencies. Setting the Key Beep length to Long will extend the DTMF tone.

Volume (Menu )

Allows you to set various volume settings.

1.Press Left Soft Key Menu.

2.Press Settings.

3.Press Sounds then press Volume.

4.Select Ringer / Earpiece / Key Beep.

5.Adjust the volume of the ringer with

then press to save the setting.

Alerts (Menu )

Allows you to set any of the four Alert options to either On or Off.

1.Press Left Soft Key Menu.

2.Press Settings.

3.Press Sounds then press Alerts.

4.Select an alert option.

Service Change (Menu )

Alerts you when service changes. When you enter a service area, the phone displays

Entering Service Area message. When you leave a service area, the phone displays

Leaving Service Area message.

Minute Beep (Menu )

Alerts you 10 seconds before the end of every minute during a call.

Call Connected (Menu )

Alerts you when the call is connected.

Back To Top (Menu )

Alerts you when you scroll through the end of a menu list.

5.Select an option and press .

6.Set Off / On with then press .

102 VX4600 VX4600 103