FEATURES & SETUP- REAR PANEL SWITCHES: DATAPORT INPUT SIGNAL
DATAPORT INPUT SIGNAL- This switch selects the regular inputs or the DataPort inputs, and allows the DataPort to enter before or after the analog processing. WARNING: There is no DataPort “flag” for this setting, so the appropriate setting must be confirmed manually.
OFF: If the DATAPORT CONNECTION is not being used, set to the OFF position. The DataPort MONITOR SIGNALS and STANDBY are still active, but the DataPort input signals will not reach the amplifier.
PRE PROC: This setting will insert the DATAPORT signals ahead of the amplifier’s signal processor. If you are using external processing on the DATAPORT input signal, be aware that additional internal processing will be added to the signal. This may cause unexpected overall results.
POST PROC: This selection inserts the DATAPORT signals after the amplifier’s processor. The subaudio filters and clip limiting remain functional, but all other processing is bypassed. See the Block Diagram for more detailed signal flow information.
DATAPORT signal routing options using the DATAPORT INPUT SIGNAL switch
8
