E. Front Installation
Fronts shipped attached to face
INSTALLATION AND REMOVAL INSTRUCTIONS FOR QUARTET AND SOLITAIRE FACE OPTIONS.
Quartet Front
Solitaire Front
Figure 8.11
For BOTH Quartet and Solitaire Fronts:
Figure 8.13 Lift up on the top of the Front, gently pulling out on the bottom. Set aside in a safe location.
Figure 8.14 The quartet door requires the use of a spacer for installation. The spacer is shipped in place and should be put back if removed.
F. Brick Installation
NOTE: The brick supplied with the Topaz is not an optional accessory. The brick must be installed for safe and proper operation.
Figure 8.12 To remove the face, loosen the thumb bolt beneath the ashlip.
Figure 8.15 Install rear panel by placing it behind the log pins, flush and centered against the back of the firebox.
NOTE: Rear panel and top panel/baffle are the same size.
January 3, 2007 |
| Page 31 |
