R

Isle Royale Wood Stove

MAINTENANCE (CONT'D)

GLASS CARE

NOTE: Remove all labels from glass prior to lighting the first fire.

This stove is equipped with ceramic, heat-resistant glass, which can only be broken by impact or misuse. Do not slam the stove door or impact the glass. When closing the door, make sure that logs do not protrude against the glass.

Inspect the glass regularly for cracks or breaks. If you detect a crack or break, extinguish the fire immediately and contact your Dealer for replacement.

A portion of the combustion air entering the firebox is deflected down over the inside of the door glass. This air flow “washes” the glass, helping to keep smoke from adher- ing to its surface. When operated at a low burn rate, less air will be flowing over the glass and the smokey, relatively cool condition of a low fire will cause the glass to become coated. Operating the stove with the Primary Air Control all the way open for 15-20 minutes should remove the built up coating. If the deposits on the glass are not very heavy, normal glass cleaners work well. Heavier deposits may be removed by using a damp cloth dipped in wood ashes or by using a commercially available oven cleaner. After using an oven cleaner, it is advisable to remove any residue with a glass cleaner or soap and water. Oven cleaner left on during the next firing can permanently stain the glass and damage the finish on plated metal surfaces.

Do not clean the glass with abrasive materials that may scratch or otherwise damage the glass. Scratches on the glass can develop into cracks or breaks. Never attempt to clean the glass while a fire is in the unit. The best method for maintaining clean glass is to operate the stove efficiently by using dry well seasoned wood and burning moderate to hot fires.

GLASS REPLACEMENT

Replace with 5mm ceramic glass only

1.Ensure that the fire is out and the appliance is cool to the touch.

2.Protect a table or counter top with padding or towels.

3.Remove door with broken glass from the appliance by lifting door up and off of the hinges.

4.Lay door face down on a table or counter making sure handle and handle attachment knob hang over the edge of the table top so door lays flat, on a soft sur- face.

5.Remove the screws from each glass retainer.

6.Remove the glass.

7.Position the glass with edges evenly overlapping the opening in the front door.

8.Replace the glass retainers. Be careful not to cross thread the screws.

9.Tighten each retainer just a few turns until each is secured. Then continue to tighten each retainer alter- nately, a few turns at a time, until the glass panel is tightened snugly.

10.Replace the door on the appliance.

CARE AND CLEANING OF PLATED SURFACES

Clean plated surfaces with vinegar or a glass cleaner before lighting your first fire.

CAUTION: Do not use polishes with abrasives as it will scratch the surface.

WARNING !

DO NOT OPERATE THE WOODSTOVE IF THE DOOR GLASS IS BROKEN OR MISSING. DAN- GEROUS OVERFIRING CAN OCCUR WHICH CAN DAMAGE THE APPLIANCE OR IGNITE CREO- SOTE IN THE CHIMNEY, POSSIBLY CAUSING A HOUSE FIRE.

 

 

 

 

Page 22

250-5763B

February 4, 2005

Page 21 Page 23
Page 22
Image 22
Quadra-Fire Isle Royale Maintenance Contd, Glass Care, Glass Replacement, Replace with 5mm ceramic glass only
Page 21 Page 23

Isle Royale specifications

The Quadra-Fire Isle Royale is a premier wood-burning stove that exemplifies innovation, efficiency, and craftsmanship. Designed to provide reliable heating for homes and cabins, it combines traditional aesthetics with modern technology to deliver a user-friendly experience while enhancing comfort.

One of the standout features of the Isle Royale is its impressive heat output. Capable of heating spaces up to 2,000 square feet, it utilizes a powerful firebox that maximizes combustion efficiency. With a capacity of up to 3.2 cubic feet, this stove allows for longer burn times, meaning homeowners can enjoy consistent warmth without the frequent need to reload firewood.

The stove also incorporates advanced technologies that optimize performance. Its patented Quadra-Fire Four-Point Burn System ensures a complete burn of the fuel, minimizing smoke emissions while maximizing heat production. This system enhances the stove's efficiency by promoting a secondary burn that ignites unburned gases, thus producing more heat from the same amount of fuel. The result is a cleaner combustion process that is better for the environment and enhances indoor air quality.

Durability is another hallmark of the Isle Royale. Constructed from heavy-gauge steel and featuring a robust cast-iron door, this stove is built to withstand the rigors of daily use. The high-quality materials not only provide longevity but also contribute to the stove's classic appearance, which can seamlessly integrate into a variety of decorating styles.

Convenience is also addressed with features such as an easy-to-use air control system, which allows users to adjust the burn rate according to their heating needs. Additionally, the stove includes a large viewing window and a state-of-the-art ceramic glass that withstands high temperatures while providing a beautiful view of the flames. This focal point adds an aesthetic charm to any living space, creating a warm and inviting atmosphere.

Moreover, the Isle Royale meets stringent EPA certification standards, ensuring that it operates cleanly and efficiently. Its commitment to eco-friendliness makes it a smart choice for environmentally conscious consumers who still wish to enjoy the comfort and ambiance of a traditional wood-burning stove.

In summary, the Quadra-Fire Isle Royale wood stove is a blend of efficiency, durability, and style, offering homeowners an exceptional heating solution that doesn't compromise on performance. With its advanced technology and thoughtful design, it stands out as a top choice for anyone seeking to enhance their home with the warmth of wood fire.
Top Page Image Contents