Reference Materials | Quadra-Fire QVI-30FB-S guide

15 Reference Materials

A. Appliance Dimension Diagram

Dimensions are actual appliance dimensions. Use for reference only. For framing dimensions and clearances refer to Section 3.

	9-9/16 in.	A
	9-9/16 in.
	142 mm
	B
		2-1/2 in.
	2-1/16 in.	64 mm
	2-1/16 in.		4 in. REF
	52 mm		4 in. REF
			102 mm
			13-3/4 in.
			350 mm
	3-1/8 in.
	80 mm
		C
				Two
				ø 2-13/16 in.
		D		71 mm
E			F	H
			G	H

				1-1/16 in.
				1-1/16 in.
				28 mm
	GAS INLET		ELECTRICAL
1-9/16 in.			ELECTRICAL	3-9/16 in.
40 mm	6-5/8 in.		ACCESS	3-9/16 in.
	169 mm		(IF EQUIPPED)	91 mm
		MODEL DIMENSIONS
	Location	QVI-30FB-S
	Location	Inches	Millimeters
		Inches	Millimeters
	A	18	457
	B	6-1/2	165
	C	29-3/8	746
	D	26-1/16	661
	E	20-5/8	524
	F	15-3/16	385
	G	22-1/8	562
	H	21-1/4	540
Figure 15.1 Appliance Dimensions
34	Quadra-Fire • QVI-30FB-S • 2020-910 Rev. H • 6/09

Image 34

Quadra-Fire QVI-30FB-S owner manual Reference Materials, Appliance Dimension Diagram

Contents

Models Commonwealth of Massachusetts Homeowner Reference Information Model Number Serial Number Table of Contents Listing and Code Approvals Inspect Appliance and Components Design and Installation ConsiderationsGetting Started Tools and Supplies Needed Inspect Firebox Minimum ﬁreplace opening requirements are shown in Figure Fireplace Size RequirementsMinimum Fireplace Opening Location Clearances Clearances to Mantels or other Combustibles above Appliance Fire Risk Asphyxiation Risk Termination LocationsVent Termination Minimum Clearances Foot minimum in snow regions Horizontal Venting Vent Information and DiagramsVent Table Key Measuring Standards Installation Preparation Venting Components Installing Vent Pipe and ApplianceConnecting Vent Pipe Reference instructions in the termination kit Placing, Securing and Leveling the Appliance Factory Built Wood Burning Installing Adaptor and Termination CapMasonry Damper Flashing Kit Optional Fuel Conversions Gas Connection Refer to for location of gas line access in ap- plianceGas Information Gas Pressures High Altitude Installations Electrical Information Wiring the ApplianceON/OFF Switch Appliance Requirements Optional Accessories Junction Box InstallationInstallation for Fan Optional Shock hazard FAN Junction BOX Finishing Installing Trim SurroundsMantel Projections Accessories Appliance SetupClean the Appliance Ember Placement Log Placement Log Assembly LOGS-QVI30FBPositioning the Logs Quadra-Fire QVI-30FB-S 2020-910 Rev. H 6/09 Quadra-Fire QVI-30FB-S 2020-910 Rev. H 6/09 Removing Glass Assembly Glass AssemblyAir Shutter Setting Replacing Glass Assembly This appliance has a Standing Pilot Ignition Operating InstructionsBefore Lighting Appliance Before operating this appliance have a qualified technician Lighting Appliance Standing Pilot Ignition After Appliance is Lit Initial Break-in ProcedureCheck Pilot Flame Appearance Do not operate appliance with glass door removed Frequently Asked Questions Symptom Possible Causes Corrective Action TroubleshootingStanding Pilot Ignition System Symptom Possible Cause Corrective Action TroubleshootingMaximum ﬂame impingement. Follow lighting instruc Maintaining and Servicing Appliance Maintenance TasksRisk of injury or property damage Inspect Maintenance Tasks Appliance Dimension Diagram Reference Materials Vent Kits Components Direct Vent Flex Liner Kits Beginning Manufacturing Date Oct Log Set AssemblyService Parts Ending Manufacturing Date Stocked Service Parts ListAt Depot Valve Assembly Be ordered from an authorized dealer Limited Lifetime Warranty Limited Lifetime Warranty Contact Information Important operating