CHAPTER 2. INSTALLATION

Modem Configuration Table (Further reference: Appendix G) Menu (0-C, set by Menu switch)

0 Factory default - &F function (set by switch) (0)Auto,(1)MNP,(2)Direct Mode.

1Asyn - &Q function

(0)Asyn

2Type of line - &L function

(0)Dial up, (1) 2 wire LL

3Modulation - +MS

function

(0)auto (1) bell103, (2) V.21, (3) V.22/bell212, (4) V.22bis

(5)V.23, (6) V.32/V.32bis, (7) V.34/V.34+

4DTE speed function

(0)get from profile 0, (1) 115200, (2) 57600, (3) 38400, (4) 19200,

(5)14400, (6) 9600, (7) 4800, (8) 2400, (9) 1200, (A) 300

5TX level - S91

function

(0)–10, (1) – 2, (2) – 4, (3)-6, (4) –8, (5) – 9, (6)-11, (7)-12, (8)-13,

(9)-14

6Rx level - %R function

(0)-43, (1) –33

7Dial stored Tel. No. (please refer to the section ‘Use T/D Switch to dial’.) function

(0)Normal

(1)Dial tel. no(stored by AT&Z1)

(2)Dial tel. no(stored by AT&Z2)

(3)Dial tel. no (stored by AT&Z3)

ACTIVE Professional External Modem User’s Manual

6