WARNING - AUSTRALIAN USERS

This FAX/Modem has been tested with Bitcom, Bitware for windows and fully complies with AUSTEL Technical Standards if the following conditions are followed :

1THE NUNMBER OF RE-DIAL MUST NOT BE SET TO GREATER THAN 3

2.THE MODEM MUST NOT BE CONFIGURED TO THE BELL MODE OF OPERATION

Software packages other than the above, or any other configurations defined by the user, were not tested and may result in the modem being operated in a non-compliant manner.

CONSEQUENTLY, THERE WOULD BE NO PERMIT IN FORCE FOR THIS EQUIPMENT, AND THE TELECOMMUNICATIONS ACT 1991 PRESCRIBES A PENALTY OF $12,000 FOR CONNECTION OF NON-PERMITTED EQUIPMENT.

For external modem, users must only use an ACTIVE AC Adaptor, Model

No . : 4824-1485-3AC. (Approval No. : N12430)

WARNING - SWEDISH USERS

After the country code or the digit 0 from a PBX, users must use a W to indicate dial tone detection. It is not allowed to use pause (comma) instead of dial tone detection (W).