CHAPTER 2. INSTALLATION

CHAPTER 2. INSTALLATION

Carefully unpack the product package that you have received and check the contents as following:

nThe modem equipment

nTelephone cable

n5V DC power adapter & power cable

nModem cable: 9 pins male to 9/25 pins female

nDigital User’s Manual (Download from www.quantum.com.hk)

The Rear View: 560UF/L & 560UF/D External Modem

Line Jack

Only use the middle 2 pins (Pin 2 & Pin 3) to connect to the “Line” jack of the modem.

SERIAL PORT

For pin assignment, please refer to Appendix D

Install your external modem

1.Power off the computer or terminal and the modem.

2.Modem cable: Connect the 9-pins male modem cable to the “Serial Port” of the modem. Tighten the screws.

Connect the other end of the modem cable ( 9-pins & 25-pins female) to the serial port of your Computer or terminal. Tighten the screws.

3.Telephone Line cable: Connect one end the phone cable to the “Line” jack of the modem and the other end to the telephone line or leased- line jack..

4.Power Adapter: Connect the 5VDC power adapter jack to the “5V DC” port of the modem. The other end of the power cable to the 110/220 power socket.

5.Power on the computer or terminal and the modem. Configure the modem by issuing the appropriate AT commands or using the front panel switches.

6.The modem is ready for operation.

ACTIVE Professional External Modem User’s Manual

2