DSCLP/SSCLP-200/300 | Quatech SSCLP-300, DSCLP-200 instruction

DSCLP/SSCLP-200/300

Two and One Channel RS-422/485

Low Profile Asynchronous

Communications Adapter

for PCI bus

User's Manual

QUATECH, INC.	TEL:	(330) 655-9000
5675 Hudson Industrial Parkway	FAX:	(330) 655-9010
Hudson, Ohio 44236	http://www.quatech.com

Image 1

Quatech SSCLP-300, DSCLP-200, DSCLP-300 user manual DSCLP/SSCLP-200/300

Contents

DSCLP/SSCLP-200/300 Warranty Information Iii Manufacturers Address Manufacturers NameApplication of Council Directive Standards to which Conformity is Declared Hardware Installation Address Map and Special Registers Hardware ConfigurationRS-422 or RS-485 Signal Line Termination Base Address and Interrupt Level IRQ Half-Duplex/Full-Duplex/Auto-Toggle Selection Page General Information Jumpers J6-J9 Full-duplex/Half-duplex Operation Signal Connections Right Card Edge Jumpers Jumpers J10-J23 define the options for this card 1 CTS0SEL, CTS1SEL J10 Clock Rate and Optional Registers Enable Scratchpad Register SPAD, J2Force High-Speed Uart Clock X2, X4, or X8 J3, 4 Clock multiplier jumper options Jumper/connector locations Hardware Installation Channel Address Range Interrupt Status Register Enabling the Special RegistersDlab Bit Spad Jumper Register selected for Bit Description Quatech Modem Control Register Quatech Modem Control Register Bit Name Description Options RegisterWrite Read Clock Rate Uart Clock Maximum Data Multiplier Frequency Clock Rate Multiplier Windows Millennium Windows Configurations Windows Windows Page Windows Windows NT Viewing Resources with Device Manager Two-Port RS-422/RS485 Serial Adapter Page DSCLP-200/300 Two-Port RS-422/485 Serial Adapter Page Page Page Page OS/2 Other Operating SystemsDOS and other operating systems QTPCI.EXE QTPCI.EXE Expert Mode display Jumper/Channel correspondence External Connections Rclk RTS/CTS Handshake AUXIN/AUXOUT Loopback Tclk Half-Duplex/Full-Duplex/Auto-Toggle Selection Half/full-duplex and Auto-Toggle selection RS-422/485 Line termination resistance values Termination Resistors RS-422/485 Peripheral Connection DSCLP-200/300 connector definitions INTA# PCI Resource Map With 64-byte FIFOs optional Specifications Computer will not boot up TroubleshootingCannot communicate with other equipment DSCLP/SSCLP-200/300