Radio Shack 3-DVD Changer owner manual Remote Control Operation, Quick Look AT the Remote Control

ˆRemote Control Operation

A QUICK LOOK AT THE REMOTE CONTROL

MUTE – Press to immediately decrease the sound lev- el. CKJ; appears on the display panel. To restore the

sound, press again.

PRESET – / + –- During AM or FM reception, you can scan through other frequencies or select the preset numbers.

BAND – selects AM or FM band while listening to the tuner function.

FM MODE (FM MONO/STEREO) – selects FM mono or stereo mode.

SURROUND – When you select an analog source (TUNER, AUX, TAPE, TV, VCR, or SAT), as you press SURROUND, the sur- round mode changes.

TEST TONE – Turns on or off the test tone function in DTS, DOLBY DIGITAL, or PRO LOGIC mode. The test tone is output from Front L speaker, Center speaker, Front R speaker, Surround R speaker, Surround L speaker, (Subwoofer speaker: when Subwoofer on).

TONE – Lets you adjust the low frequency level (BASS) with (left arrow icon) or (right ar- row icon) and also you can adjust high fre- quency level (TREBLE) with (left arrow icon) or (right arrow icon) according to your taste and room acoustics.

SLEEP – Press to set the sleep time. The sleep time changes to '&, (&, )&, ... /& (minutes), and E<< (former display).

TUNING MODE – selects and deselects preset mode.

MEMORY – Press to memorize the desired station frequency.

OPERATING RANGE OF THE REMOTE CONTROL

The remote control may not work properly if:

•There are obstacles between the remote control and the receiver’s remote sensor.

•Direct sunlight or fluorescent light is shining onto the remote sen- sor.

•The receiver is located near a device that is emitting infrared rays.

•The receiver is operated simultaneously with another infrared remote control.

12 Remote Control Operation