1.Press down and slide off the battery compartment cover.
2.Lift the battery pack out of the compartment.
3.Plug the battery pack’s connector into the socket in the compartment (the connector fits only one way). Then place the battery pack in the compartment.
4.Replace the cover.
To charge the battery pack, place the handset on the base. The CHARGE/IN USE indicator on the base lights. !
Recharge the battery pack when Low Battery flashes on the display.Ô
When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear error beeps. If this happens, place the handset to the base to change the digital security code.
Using a damp cloth, clean the charging contacts on the handset about once a month.
About once a month, fully discharge the
battery pack by keeping the handset off the base until Low Battery flashes.
Otherwise, the battery pack loses its ability to fully recharge.
! IMPORTANT !
Be sure the battery pack is properly connected before you try to charge it. The CHARGE/IN USE indicator lights when the handset is on the base, even if the battery pack is not connected.
Ô NOTES Ô
•If the phone does not work, recharge the battery pack. (The battery power might be too low for the display to operate.)
•If the battery pack becomes weak during a call, the handset beeps and Low Battery flashes. When this happens, you cannot make a call on the phone until you recharge the battery pack.
•If the battery pack is or the base loses power while the handset is away from it, place the handset on the base to change the digital security code. If it was the handset that lost power, recharge the battery pack.
Installation
11
