Memory Dialing
3.Press MEM or SELECT.
4.Press MEM or SELECT. A cursor flashes indicating that the display is ready for the name to be entered.
If “Edit Memory X X” appears, the selected memory location is already stored. Then you must either edit the
entry in this location, delete the entry in this location, or select ¨Go Back¨ to choose another location.
5.To enter a name (up to 13 characters), use the number keys.
•See “Steps for Entering Names and Special Characters” on page 21.
•Use #/> and 
/TONE/< keys to move the cursor to the desired location.
•Use CH/DELETE to delete characters as needed.
•Press and hold CH/DELETE to delete all the characters.
•If a name is not required, go to step 6.
6.Press MEM or SELECT. ¨Store Number¨ is displayed.
The cursor flashes indicating that the display is ready for the number to be entered.
7.Use the number keys to enter the phone number.
•The phone number cannot exceed 20 digits.
20
