Radio Shack 43-3557 Changing the Auto Talk, Entering Your Area Code, Setting Menu Options

SETTING MENU OPTIONS

There are five setup options available. They are Auto Talk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language.

Auto Talk allows you to answer the phone without pressing the TALK/FLASH button. If the phone rings when Auto Talk is On, simply remove the handset from the base and the phone automatically answers the call. If the phone rings when Auto Talk is Off, you must press TALK/FLASH to answer the call. Ô

Changing the Auto Talk and

CIDCW

1.Press and hold CID.

2.Use VOL or VOL keys to move the pointer to the selection that you would

like to change. Press SELECT to toggle between ¨On¨ and ¨Off¨ for Auto Talk and CIDCW.

3.Press END and return the handset to the base unit to complete the setting. The handset returns to the standby mode.

Entering Your Area Code

If you enter a three-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option if your calling area requires ten-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full ten-digit number.

Ô NOTE Ô

The Cordless phone features include Auto Talk and Auto Standby. Auto Talk allows you to answer a call by just removing the handset from the base so you don’t have to waste time pushing buttons. Auto Standby allows you to hang up by simply returning the handset to the base.

Ô NOTES Ô

Area Code

When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the CH/ DELETE and number keys to enter the new area code. Then press SELECT. A confirmation tone sounds. To complete the setting, press END or return the handset to the base unit.

Choosing the Dialing Mode

Make sure your battery pack is fully charged before choosing the dialing mode.

Operation

17