Radio Shack 43-3557 owner manual CONNECTING/CHARGING the Battery Pack

Installation

! IMPORTANT !

The EPA certified RBRC® Battery Recycling Seal on the nickel- cadmium (Ni-Cd) battery indicates RadioShack is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-THE-SHACK (1- 800-843-7422) for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. RadioShack’s involvement in this program is part of the company’s commitment to preserving our environment and conserving our natural resources.

2.Plug one end of the supplied modular cord (short for a wall plate, long for direct wall mounting) into the TEL LINE jack on the base’s back.

3.Plug the supplied AC adapter's barrel plug into the DC IN 9V jack.

4.Route the adapter

and modular cords through the bracket’s grooves.

5. For a wall plate, align the bracket’s keyhole slots with

the wall plate

studs and slide the base downward to secure it.

For direct wall mounting, align the bracket’s keyhole slots

with the mounting

screws and slide the base downward to secure it.

6.Plug the adapter into a standard AC outlet. And plug the modular cord’s other end into a modular phone line jack.

CONNECTING/CHARGING THE BATTERY PACK

The phone comes with a rechargeable nickel-cadmium battery pack in the handset, but not connected. Before using your phone, you must connect the battery pack. Then charge it for about 15–20 hours. !

10