•Use PAUSE/REDIAL to enter a pause
in the dialing sequence. The display shows a ¨P¨. Each pause counts as one digit and represents a two
second delay of time between the digits. Ô
•Use CH/DELETE to delete digits as needed.
8.Press MEM or SELECT. You will hear a confirmation tone. Memory storage is complete. For example, if you store a name and number into memory
location number 01, the display shows ¨Memory01 Stored¨.
After about two seconds, the Select Memory screen is displayed.
Repeat steps 2 - 8 to store more numbers.
9.Press END to return to the standby mode.
STEPS FOR ENTERING NAMES AND SPECIAL CHARACTERS
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key. Ô
Ô NOTE Ô
The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.
Ô NOTE Ô
If the next character uses the same number key, you must press #/> to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set.
Memory Dialing
21
