Operation
1.When the phone is in the standby mode, press and hold CID. The Caller ID setting screen appears.
2.Press 
VOL key twice to select ¨Area Code¨.
3.Press SELECT.
4.Use the number keys (0 - 9), or CH/ DELETE to enter the
5.Press SELECT. A confirmation tone sounds and the displayed area code is entered.
6.Press END or return the handset to the
base unit to complete the setting. The handset returns to the standby mode.Ô
Choosing the Dialing Mode
Most phone systems use tone dialing which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. Ô
The default setting is tone dialing. Depending on your dialing system, set the mode as follows:
1.When the phone is in the standby mode, press and hold CID.
2.Press 
VOL key three times to select ¨Dial¨.
3.Press SELECT to toggle between
¨Tone¨ and ¨Pulse¨ for each setting.
4.Press END or return the handset to the base unit to complete the setting. The handset returns to the standby mode.
18
