RadioShack’s involvement in this program is part of the company’s commitment to preserving our environment and conserving our natural resources.

5'66+0)"6*'"&+#.+0)"/1&'

Your phone comes set for tone dialing. If you have pulse service, you need to change the dialing mode.

If you are not sure which type of service you have, do this test:

1.Lift the handset, press TALK/FLASH, and listen for a dial tone.

2.Press any number other than 0 or, if required, an outside line access code (9, for example).

If the dial tone stops, you have touch-tone service.

If the dial tone continues, you have pulse service.

Once you have determined which type of service you have, set the dialing mode.

1.Press END to hang up the phone if necessary, then hold down CID/MENU until the selection screen appears.

2.Press 4 or 9three times to select :_Wb.

3.Press SEL to toggle between Jed[ýand Fkbi[. ±ý

If the battery power is too low, the dial mode might reset to tone. If you are on a pulse line and cannot make a call, try re-setting the dialing mode to pulse.

±"016'"±"

The phone exits setting mode if a call or page is received, or if you press

END.

Installation

11

Page 11
Image 11
Radio Shack 43-3817 owner manual 566+06*&+#.+0/1, End