Answering System Operation
28
setting. The current setting — (, *, ,, or jI (toll saver) — displays.
2.Repeatedly press 6or7until the desired number appears.
3.Press SET/RING to store the setting.
The system beeps and announces “Ring Time” and the currently set ring time.
5'66+0)"6*'"4'%14&"6+/'
You can set the recording time to ', *, or 7 (Announce Only)ýto determine how the system records incoming messages.
When set to ' or *, the system plays the outgoing message and lets callers leave a message up to 1 minute (for ') or 4 minutes (for *) long. When set to 7, the system plays the outgoing message but does not let callers leave a message.
1.Press MENU four times. The system announces “Record time” followed by the current setting. The current setting — ', *, orý7 — appears.
2.Repeatedly press 6or7until the desired number appears.
3.Press SET/RING to store the setting.
The system beeps and announces “Record Time” followed by the currently set record time.
5'66+0)"6*'"/'55#)'"#.'46" 610'
The Message Alert feature lets you know you have new messages by sounding a short beeping tone. When a new message is received with the message alert on, the alert tone sounds every 15 seconds.
