Radio Shack 43-3817 owner manual 5GVVKPIVJG5GEWTKV%QFG, 7UKPIVJG6QNN/5CXGT, 75+04/16%1//#0&5

Answering System Operation

34

5GVVKPI"VJG"5GEWTKV["%QFG

The two-digit remote operation security code prevents unauthorized remote access to your messages. The code is preset to 80. To change the code to any number from 00 to 99:

1.Press MENU twice. The system announces “Security code,” followed by the currently set code. The code appears.

2.Repeatedly press or hold down 6or7to change the number.

3.Press SET/RING to store the setting. The system announces “Security code,” followed by the newly set code.

To check your code at any time, press MENU twice. The code appears, and the system announces it.

7UKPI"VJG"6QNN/5CXGT

If the ring time is set to jI (toll-saver) (see “Setting the Number of Rings” on Page 27), the system answers after two rings if you have new messages (ones you have not listened to).

If there are no new messages, the system answers after four rings, so you can hang up before the system answers and avoid unnecessary long- distance charges.

If the message memory is full, the system answers after about ten rings, regardless of the ring time setting.

75+0)"4'/16'"%1//#0&5

While in remote operation, the system stops all answering functions and displays h9. Answering functions resume when it is no longer being operated remotely, if you have not turned the system off.