Remote operation stops when someone picks up the handset or any phone on the same phone line.
1.Dial your phone number and wait for the system to answer. If the system is not set to answer calls, it will answer after about ten rings and sound a series of beeps.
2.When the outgoing message begins (or the system sounds a series of beeps), press #, then enter your security code within 2 seconds.
3.If the code is correct, the system announces
the number of new and old messages, then “To play incoming message, press # 2. For help, press # 0.”
If the system does not respond, try entering your code again. If you enter an incorrect code three times, the system beeps and disconnects.
4.While the system is beeping, press # and (within 2 seconds) the number for the desired
command. (See “Remote Commands” on Page 36.) ±ý
±"016'"±"
If you wait more than 15 seconds between keypresses, the system sounds a long beep and hangs up.
Answering System Operation
35
