5'66+0)"#761"6#.-
Your phone is preset so you must press TALK/ FLASH to answer a call. With Auto Talk turned on, you can answer a call by just lifting the handset from the base.
1.Lift the handset and hold down CID/MENU until the setup menu appears.
2.Press SEL to change the Auto Talk setting. Ed or E\\ appears.
3.To clear the screen when you finish, press END or return the handset to the base.
6740+0)"%#..'4"+&1%#.." 9#+6+0)"1011((
If you have Call Waiting and Caller ID service, you can set the system to show Caller ID information for an incoming call even while you are on the phone.
1.Lift the handset and hold down CID/MENU until the menu appears.
2.Press 2 or 9 to select 9?:9Mý(Caller ID/Call Waiting).
3.Press SEL to change the Caller ID/Call Waiting setting. Ed or E\\ appears.
4.Press END and return the handset to the base to store the new setting.
5614+0)";174"#4'#"%1&'
You can store your local area code in the phone’s Caller ID record so the area code does not appear if the received call is from your local area. If for some reason you need to dial the area code (or store it in memory), you can add it afterwards. See “Adding/ Deleting the Area Code” on Page 24.±ý
Installation
±"016'"±"
If your calling area requires
13
