second of playback and plays the previous second, until the beginning of the message. Release 6 to resume normal playback.

To replay the previous message, press 6 within about 2 seconds (4 seconds during remote operation) after a message begins playing. If the current message is the first new message, the system plays back from the beginning of the current message (it does not go back into the old message group).

#&,756+0)"6*'"81.7/'

To adjust the speaker’s volume, repeatedly press VOL 8 or 9 on the base. The volume setting from & (lowest) to / (highest) appears.

&'.'6+0)"/'55#)'5

To delete the current message while it is playing, press CH/DEL. The system beeps.

To delete all messages, while messages are not playing, press DELETE. The system beeps and announces, “To delete all messages, press DELETE again.” Within 30 seconds, press DELETE. The system beeps, the display clears momentarily, then

&appears. ±ý

4'/16'"12'4#6+10

While you are away from your home or office, you can use a touch-tone phone, or a pulse (rotary) phone with a pocket tone dialer (available through RadioShack), to enter your security code and do any of the following:

Set the system to answer or not answer calls.

Listen to your messages.

Record a new outgoing message.

Record a memo.

Erase messages.±ý

Answering System Operation

±"016'"±"

±ýDeleting Messages

You cannot delete new (unplayed) messages. If you try to delete all messages while you still have new messages, the system beeps and announces “Please play back all messages.”

±Remote Operation You cannot remotely operate the system using its handset or another telephone on the same line.

33

Page 33
Image 33
Radio Shack 43-3817 owner manual #&,756+06*81.7, +0/55#5, 16124#6+10