Radio Shack 43-3821 owner manual 14&+#.+0, Storing a Number in Memory, Dialing a Memory Number

/'/14;"&+#.+0)

You can store up to 10 phone numbers in memory, then dial a stored number by entering its memory location number. You can also dial a number stored in memory location number 1 by pressing SPEED DIAL. Each number can be up to 16 digits.

5614+0)"#"07/$'4"+0"/'/14;

1.Lift the handset.

2.Press MEMORY. TALK/BATT blinks.

3.Enter the number and any tone or pause

entries (see “Using Tone Services on a Pulse Line” on Page 14 and “Entering a Pause”). ±

4.Press MEMORY again, then enter the memory location number (0-9) where you want to store the number. A tone sounds to indicate that the number is stored.

To replace a stored number, simply store a new one in its place. Or, lift the handset and press MEMORY twice. Then press the memory location number (0- 9) you want to clear. A tone sounds.

'06'4+0)"#"2#75'

Some telephone systems require you to dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, you should also store a pause after the access code to allow the outside line time to connect.

To enter a 2-second pause, press RDL/PAUSE. You can add more pause entries for a longer pause.

&+#.+0)"#"/'/14;"07/$'4

To dial a number stored in memory, lift the handset and press TALK. TALK/BATT lights. When you hear a dial tone, press MEMORY and enter the memory location number for the number you want to dial. ±

±"016'"±"

Storing a Number in Memory

•An error tone sounds and the phone exits the programming mode if you wait more than 30 seconds between keypresses.

•Each tone or pause entry uses one digit of memory.

•If you try to enter more than 16 digits, the phone beeps 5 times and exits the programming mode. Start over at Step 2 and enter no more than 16 digits in Step 3.

Dialing a Memory Number

If you select an empty memory location, the phone beeps 5 times.

Telephone Operation

15