Answering System Operation
store the setting. The system announces “Security code,” followed by the newly set code.
To check your code at any time, press MENU twice. The code appears, and the system announces it.
75+0)"6*'"61../5#8'4
If the ring time is set to jI
If there are no new messages, the system answers after four rings, so you can hang up before the system answers and avoid unnecessary long- distance charges.
If the message memory is full, the system answers after about ten rings, regardless of the ring time setting.
75+0)"4'/16'"%1//#0&5
While in remote operation, the system stops all answering functions and displays Bh. Answering functions resume when it is no longer being operated remotely, if you have not turned the system off.
Remote operation stops when someone picks up the handset or any phone on the same phone line.
1.Dial your phone number and wait for the system to answer. If the system is not set to answer calls, it will answer after about ten rings and sound a series of beeps.
2.When the outgoing message begins (or the system sounds a series of beeps), press #, then enter your security code within 2 seconds.
3.If the code is correct, the system announces the number of new and old messages, then “To
24
