5'66+0)"6*'"&#;16+/'
You must set the day and time so the system can
record the correct day and time of each message. ±ý
1.Press MENU once. The system announces “Time,” then the currently set time, day, and the day’s number (' for Sunday, ( for Monday, and so on) appear.
2.Repeatedly press 7on the base to move forward or 6 to move backward until the correct day appears, then press SET/RING. The system announces and displays the hour.
3.Repeatedly press 6or7until the correct hour appears, then press SET/RING. The system announces and displays the minutes.
4.Repeatedly press 6or7until the correct
minutes appear, then press SET/RING. The system announces “AM” or “PM,” and 7 or F appears.
5.Press 6or7to choose AM or PM, then press SET/RING. The system beeps and announces “Time” then announces the currently set day and time.
To check the day and time, press MENU once. The system announces the currently set day and time.
5'66+0)"6*'"07/$'4"1("4+0)5
You can select how long the system waits to answer a call — 2, 4, or 6 rings, or
1.Press MENU three times. The system
announces “Ring time” followed by the current setting. The current setting — (, *, ,, or jI (toll saver) — displays.
±"016'"±"
•Enter each key press within about 2 minutes. Otherwise, the system exits the time setting process and you must begin again with Step 1.
•If power fails, the clock retains the current time. When the power is restored, it starts counting again from the time the power failed.
Answering System Operation
17