6417$.'5*116+0)
Troubleshooting | 2TQDNGO | 5WIIGUVKQP | |
|
| ||
Low volume or | Someone has picked up another phone on the same line. Hang | ||
| |||
| unusual sounds. | up the other phone. | |
|
| Press CH to change the channel. | |
|
| Keep the handset away from computers, remote control toys, | |
| Severe noise | wireless microphones, alarm systems, intercoms, room monitors, | |
| interference. | fluorescent lights, and electrical appliances. | |
|
|
| |
|
| Move the handset to another location or turn off the source of | |
|
| interference. | |
| The phone does not | Be sure the base’s phone line cord and AC adapter are correctly | |
| work or works poorly. | and securely connected, and the battery pack is charged. | |
| The phone cannot be | Lift the base’s antenna to a vertical position. | |
| operated at a useful |
| |
| distance from the | The handset’s range has decreased. Return the handset to the | |
| base because the | cradle and recharge the battery pack. Replace the battery pack if | |
| signal becomes weak | necessary. | |
| or noisy. |
| |
|
| If the charging contacts on the handset and base are dirty, clean | |
| The handset battery | them with a pencil eraser. | |
| pack does not charge. | Be sure the battery pack is connected correctly. | |
|
|
| |
|
| Replace the battery pack. | |
|
| Move the base away from other electrical devices and sources of | |
|
| noise. | |
|
|
| |
| The handset does not | Move the handset closer to the base. | |
| ring or receive a page. | Lift the base’s antenna to a vertical position. | |
|
|
| |
|
| Be sure the battery pack is charged. (If the battery power is too | |
|
| low, it does not have enough power to light TALK/BATT.) | |
|
| Move the handset closer to the base. | |
|
|
| |
|
| Lift the base’s antenna to a vertical position. | |
|
| Be sure the battery pack is charged. (If the battery power is too | |
| The handset stops | low, it does not have enough power to light TALK/BATT.) | |
|
| ||
| If the base loses power while the handset is away, the security | ||
| working or works | ||
| poorly during a call. | ||
|
| base, then place the handset back on the base. The CHARGE/IN | |
|
| USE indicator lights, indicating that the code is set again. | |
|
| If the charging contacts on the handset and base are dirty, clean | |
|
| them with a pencil eraser. | |
|
|
|
26
