Telephone Operation
±"016'"±"
Using Redial
•The redial memory holds up to 24 digits, so you can redial
•The redial memory also holds pause entries (see “Entering a Pause” on Page 15).
Using a Headset
•Connecting a headset disconnects the handset’s earpiece and microphone.
•VOL/RING on the handset also controls the connected headset’s volume.
•If you place the handset on the base to recharge it while the headset is connected, be sure the handset seats properly.
•With a headset connected, you make or answer calls as usual using the keys on the handset.
•You can use an optional handset holder (available from RadioShack) to hang the handset on your belt for greater convenience.
If you do not have any special phone services, pressing FLASH might disconnect the current call.
75+0)"4'&+#.
You can quickly dial the last number you dialed. Lift the handset and press TALK, then press RDL/ PAUSE when you hear a dial tone. ±
75+0)"610'"5'48+%'5"10"#" 27.5'".+0'
Some special services, such as
When you hang up, the phone automatically resets to pulse dialing.
2#)+0)
To page the person who has the handset or to locate the handset when the phone is not in use, press PAGE on the base. The handset beeps for about one minute. To stop it from beeping sooner, press any key on the handset or return the handset to the base. Press PAGE again to stop the paging at the base.
75+0)"#"*'#&5'6
You can connect an optional headset with a 3/32- inch
To connect the headset, open the rubber cover on the side of the handset, then insert the headset’s plug into the jack.
When you finish using the headset, disconnect it from the handset and close the rubber cover to protect the jack. ±ý
14
