The Integrated Answering Device
2. Press SELECT/VOLUME/ or SELECT/VOLUME/ until the desired ring time appears.
3.Press set to select the new ring time. You hear a confirmation tone, then the announcement “Ring time” and the new ring time is announced. After a few seconds, the system announces “To set record time, press menu again”.
Selecting the message Record Time
You have three record time options. The options “1 minute” or “4 minutes” set the duration for recording the incoming messages. “Announce only” answers the call with the preset greeting or your personal greeting but prevents the caller from leaving a message.
1.Press clock/menu four times in standby mode.
You hear “Record time” and the current recording time ([ 
] 1 minute, [ 
] 4 minutes, [ 
] Announce only, No recording), and it is displayed on the base. Then you hear the guidance for setting the record time.
2. Press SELECT/VOLUME/ or SELECT/VOLUME/ until the desired time appears.
3.Press set to select the new recording time. You hear a confirmation tone, then the announcement “Record time” and new recording time is announced. After a few seconds, the system announces “To set message alert, press menu again”.
Announce only feature
The announce only feature plays a prerecorded outgoing message “Hello, no one is available to take your call. Please call again.”, and it will not allow the caller to leave a message. To set “Announce only”, follow the steps above. The
22
