MEMORY DIALING
STORING PHONE NUMBERS IN MEMORY
Memory Dialing allows you to dial a number using just a few key presses. Your phone stores up to 10 numbers in the handset. Ô
1.When the phone is in the
MEM. The TALK/BATT LOW LED flashes.
2.Enter the phone number, up to 20 digits. If a pause is needed during the dialing sequence, press REDIAL/PAUSE to insert a pause. Each pause counts as a digit and represents a two second delay in time between digits as they are sent.
3.Press MEM again.
4.Enter the memory location (0 - 9) on the keypad. A tone indicates that the number is stored. If you enter a number in a location that has a previously stored number it will overwrite the existing number without warning.
MAKING CALLS WITH MEMORY DIALING
1.Press talk, then press MEM. Ô
2.Enter the memory location (0 - 9) on the keypad. The stored number is automatically dialed. Ô
CHAIN DIALING
The memory locations on the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
Ô NOTE Ô
Storing Phone Numbers In Memory
•In memory dialing operation, you must press a key within 30 seconds. Otherwise, an error tone will sound and the phone will return to standby.
If you return the handset to the base, the phone will also return to standby.
•The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.
•The pause key counts as one digit. Pressing
REDIAL/PAUSE more than once increases the length of pause between numbers.
Making Calls With
Memory Dialing
•To exit the memory function without dialing, press end. The handset returns to standby.
•If you select a memory location that does not have a stored number, an error tone sounds and the phone will not dial.
Memory Dialing
15
